5 Tips to Make Your Shower Floor Less Slippery

Do you have a slippery shower floor? Do you dread walking in your shower because it’s such a hazard?

If you answered yes to all the questions, then you’re on the right page. In this article, we will go over some ways to fix your slippery shower floor problem and how to prevent it from happening in the future.

A slippery shower floor is the bane of many people’s existence. It can make stepping out of the shower difficult or impossible without a major slip-up. It’s not just inconvenient, either – a slippery shower floor can be downright dangerous. What’s worse is that it can become a breeding ground for all sorts of germs and bacteria. In this post, we’ll explore some ways you can make your shower safer and easier to use with just a little effort on your part!

There are many ways that you can make your slippery shower floor less slippery. For example, chemicals such as soap scum and hard water deposits on the tile make it slick – if you clear these off your feet, you will have less trouble getting around in the shower! In addition, some DIY remedies work wonders on tile floors.

What is the Problem with Slippery Shower Floors, and Why is it dangerous?

The problem with slippery shower floors is that when you step on them, your feet can slide out from under you, and you can fall.

This type of fall is not just inconvenient and annoying. It can also be dangerous because it often leads to sprains, bruises, broken bones, or worse.

The reasons why slippery shower floors are dangerous are:

1. The water makes the floor wet and slippery. Wet surfaces are a common cause of slippery shower floors. This can be due to a leaky pipe or a clogged drain not draining correctly.

2. The floor is often covered in soap or other suds that make the floor even more slippery. Soap scum can also cause slippery showers if it builds up on the floor’s surface and does not dry properly before someone steps on it again.

3. The bathroom may be a wet and humid environment which means that the floor will always be moist, and this may be a breeding ground for bacteria, mold, and mildew.

4. Mold and mildew can grow in your bathroom if you have an issue with moisture levels or humidity in your home.

Tips to Prevent Slippery Shower Floors

Slippery surfaces are a significant cause of falls and injuries. The elderly, people with disabilities, and children are most at risk. But prevention is better than treatment. There are many ways to prevent slipping on bathroom surfaces. Here are 5 tips so your feet stay on the ground!

  1.  Clean Your Floors 

The first step to do is to clean the shower. If you want to prevent your shower from becoming a slippery floor, you must clean it regularly. This will help remove any soap scum or other residue that may make your shower slippery.

It is essential to keep the floor clean because it can be a breeding ground for bacteria, mold, and mildew. This will help prevent slips and falls and reduce the risk of injury from slipping on wet surfaces.

  1. Use Anti-Slip Mat

The first solution is an anti-slip mat for bathrooms and showers. This mat is designed to work on all surfaces, including tile, linoleum, and vinyl flooring. In addition, the mat has a suction cup that can be attached to any surface in the shower or bathroom. The suction cup will help keep the mat from moving around while you are in the shower or toilet.

The bathmat also has a rubber backing that provides extra grip, so it doesn’t move around while you are in the shower or on the toilet.

  1. Use Slip-Resistant Carpet Tiles 

The anti-slip tiles for shower stalls are made of a unique material with a textured surface that provides traction and prevents slipping and falling. They can be installed in any type of flooring, including ceramic tile, concrete, or wood. You can also install it under your kitchen or bathroom sink to prevent spills from causing accidents.

Rubber mats provide an excellent grip, and they are easy to clean. The downside is that they can be expensive and don’t last forever. Vinyl tiles, on the other hand, provide a good grip, and they are very affordable. They also last for years, but you have to install them yourself or hire someone who knows how to do them correctly. 

  1. Use Bleach-based Cleaners

Use tile cleaner on stubborn stains, then wipe with a microfiber cloth or sponge and rinse with clean water until it’s all gone (or use vinegar).

Use bleach-based cleaners like Clorox® Regular-Bleach or Clorox® Toilet Bowl Cleaner for tough stains.

  1.  Use an Anti-slip Coating

This slippery shower floor solution is a liquid-based coating that can be applied directly onto your floor. A quality anti-slip coating will not only provide a safety measure to your shower, but it will also increase the lifespan of your tiles and grout. 

There are various types of anti-slip coatings available on the market today. These include rubberized coating for floors, non-slip coating for bathrooms, and anti-slip paint for showers.

There are many different ways to apply an anti-slip coating to your shower. Sprayers are one of the most popular anti-slip coating methods because they allow you to coat the entire shower floor in one go and work well with large areas.

Other Tips for Maintaining a Slip-Free Bathroom Floor

1. Use a squeegee to remove excess water from the floor after you shower or bathe your pets so that soap scum doesn’t build up over time and makes it slippery when wet.

2. Avoid using too much soap: This is the first and foremost tip you must follow. To avoid soap scum on the floor, use just a few drops of soap, and be sure to wipe it off after you are done with your shower or bath.

3. Clean hard-to-reach areas with a long-handled brush or scrubber, then rinse them with clean water until they’re all gone (or use vinegar).

4. Clean the grout between tiles in your bathroom: You can use baking soda and vinegar to clean the grout between tiles in your bathroom for best results – this will help remove smells from your bathroom too!

Taking Care of Your Bathroom with Safety in Mind

When choosing a bathroom cleaner, you want to ensure that the product is safe for your family and pets. You also want to ensure that it will not leave a residue or damage your fixtures.


A bathroom cleaner should be safe for everyone in the home. This includes children and pets. Before you buy, read the label carefully and ensure that the ingredients are safe for everyone in your home.


You don’t want any residue to linger on surfaces after you clean them. It can cause stains or discoloration on your fixtures and create an unpleasant odor. Always check for a no-residue guarantee before buying anything, so you know it won’t leave any mess behind when you use it.

In conclusion, several different options can be used for dealing with a slippery bathroom or shower floor. Of course, the most cost-efficient way would be to install anti-slip mats in any room where one encounters a problem with slipping and sliding.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *